riser造句怎么写

8、Optimization study of drilling riser guiding holes

10、Early riser: in 2006, because of running, I became an early riser.

12、Slug velocity of severe slugging in pipeline-riser system

14、Everyone knows that I am an early riser.

16、The drift flux model was used to study gas hold-up in riser.

18、Research on wave-loading fatigue of drilling riser in ultra-deep water drilling

20、Do you believe that anyone can ditch their alarm clock and become a happy early riser?

22、There are many benefits to being an early riser, not the least of which is enjoying magnificent sunrises.

24、Designers have apply themselves to designing the PGR with high efficiency, low noise, small vibration, low temperature riser.

26、It is valuable for CFB desulfurization reactor design optimization to study the gas-solid flow field characteristic in CFB riser.

28、A telescoping joint at the surface in floating offshore operations that permits vessel heave (vertical motion) while maintaining a riser pipe to the seafloor.

30、In riser design of steel casting, modulus method is the most widely used method, and the cubic equation method is a most close method in modulus method.

32、In the operation progress of offshore exploratory well, the strength and stability of drilling riser can play an important role in offshore drilling and completion.

34、The water flow velocity in the suction pipe, which is crucial for evaluating the performance on pumping fish, can be measured by the pumped water flow rate of the riser in an air lift pump system.

36、The effects of various factors, such as top pre-tension, inner fluid density, current velocity profile, outer diameter and riser wall thickness on VIV-induced fatigue damage in the …

1、exothermic riser sleeve

3、riser with floatation modules

5、Set the riser tensioners to support the riser and lower marine riser package (LMRP) .

7、Adjust the riser tensioners as required.

11、Why did you decide to become an early riser?

15、Riser pipe: a four-foot-diameter steel pipe called a riser connects the ship to the borehole.

19、One of the things I've been struggling with recently is becoming an early riser.

23、The current flowed in flue end negative bar is bigger than in aluminum outlet end. And their current are respectively sent to middle riser bus and aluminum outlet riser bus.

27、The axial tensile had greater influence on the ultimate strength of the dented riser as the depth was deeper.

31、I think my previous early riser conditioning was a more significant factor in being able to get up as soon as the alarm went off.

35、The basic theory and technical points of a new kind of lap gate(riser)adopted to produce iron castings of wheels are discussed and good economic results of this technology in production are also…

2、double catenary riser

6、Our manager is an early riser.

13、Drilling riser dynamic characteristics of marine deep water

21、Marine riser is a steel or flexible pipe which transfer well fluids from the seabed to the surface.

29、The said process has a finished product rate higher than 95% and a sprue and riser head system weight lower than 20 wt% of the casting.

37、The displacement of each mode is determined by a balance between the energy fed into the riser over lock-in regions and the energy dissipated by the fluid damping over the remainder.

9、In the riser system of offshore platform, the wave force ACTS frequently on the riser.

25、By comparison of five kinds of riser, the paper recomends the casting process design of side-blind riser which can assure the casting quality and reduce the casting cost.

4、Are you and early riser?

33、The VIV characteristics of the cylinder with a small aspect ratio and the deep-sea riser with a large aspect ratio in a uniform current profile are numerically simulated and analyzed.

17、Once I applied those ideas, I was able to become an early riser consistently.