rocker arm造句怎么写

The article is concerned with the structural characteristics, and the test technique for the performance of an automatic self-locking, two fulcrum revolving tipper with rocker arm.

To raise the polishing efficiency of Cubic boron nitride (CBN) superhard material, crank rocker arm mechanism has been developed by using Computer Simulation Technology.

Install the push rods, rocker arms, pivots and bridges in the order they were remove

"With this arrangement, the camshaft is directly below the valve lifter, and no push rods or rocker arms are necessary. "

Photo 1 shows the rocker arms with the rocker arm pins and ball bearings installed.

One of the heads with rocker arm brackets and spark plugs installed.

The "EPG" (two jaw) and "ETG" (three jaw) parallel gripper lines utilize a double acting piston and rocker arm design.

The downward-moving side of the rocker arm pushes on the valve stem to open the valve.

"As the camshaft turns, the cam lobe comes around under the valve lifter. This raises the lifter, which in turn pushes upward on the push rod. The push rod, as it is lifted, causes the end of the rocker arm to move up."

The last photo shows the fixture Tom used in the rotary table to machine the outer shape of the rocker arms with their rounded ends.

The rocker arm pivots around its supporting shaft so that the valve end of the rocker arm is forced downward. This downward movement forces the valve to move downward off its seat so that it opens.

The valve rocker arm rotating inertia of a high-speed internal combustion engine has a greater effect on dynamic performance of a valve timing system.

Hand tighten oil feed line for rocker arm assemblies

Install the engine cylinder head, push rods, rocker arms, bridges, pivots and engine cylinder head cover.

The main construction, working principle, function and operation of the electric rocker arm mill of silk quilt are described.