decrease with造句怎么写

Both the optical absorption coefficient and bandgap decrease with increasing in film thickness.

Each increment of length brings a further saving, but the sizes of such benefits decrease with increasing neck length.

The results show that the GMI ratios first increase and then decrease with the increase of each of them.

However, when the gear rotational velocity exceeds a certain value, its contact fatigue life will decrease with the increase of speed.

One drug is based on a line of peptides he calls mitochines, which decrease with age in the normal population, but not as much among centenarians.

The change of blast furnace indices with the oxygen enrichment and PCI were obtained by a mathematical-simulation, which indicates that the replacement ratio will decrease with increasing of PCI rate.

If quality of life reaches a certain level, the population will naturally decrease without government control.

Processing capacity will decrease with imported sand temperature increase.

The solubilities of the gases generally decrease with increased water salinity and increase with pressure.

The adsorption equilibrium time shortens and the adsorption capacity and ratio decrease with temperature.

The values of density and refractive index of the saturated solution decrease with the ethanol content increasing.

There is a increase in heat radiation with a increase in load, and there is a decrease with an increase in speed.

Based on an analysis of the accumulated data of the cosmic ray experiments, find that inelasticity K decrease with energy as 0.

The asymmetry factor commences to decrease with increasing absorption coefficient.

It is also found that mechanical properties and corrosion resistance decrease with increase of B addition.

Cumulative distributions have the disadvantage that they can increase or decrease with increasing size depending on definition.

The main conclusion is that: When the temperature field in the crack surface is uniform, the energy release rate will decrease with time, until it reaches a lower limit value.

Both of the dielectric constant and pyroelectric coefficient decrease with decreasing temperature, no anomalies being observed.

Combustion efficiency also decrease with bed temperature because of the decrease in strength of the fuel agglomerates.

So efficiency tends to decrease with increasing size once firms have passed the point where they can take full advantage of mass production.