TC4造句怎麼寫

8、Study on TC4 Powder Laser Micro Cladding Deposition Manufacturing by Powder Precise Jet

10、The effect of the atmosphere on the structure and properties of ion nitriding layer of alloy TC4 was investigated.

12、In order to solve the problems occurring in the combined bending and forming process of TC4 sheet 3.

14、The influence of two abnormal forging processes on the microstructures and tensile properties of TC4 alloy is investigated.

16、The diffusion zone width of main alloying elements increases and hardness of the friction weld zone near TC4 titanium alloy side improves after post-weld heat treatment.

18、Methods: Electrochemical technique was adopted to detect the changes of anode polarization curves of TA2 and TC4 after welding with laser or pulsed tungsten argon arc.

20、Coated by the mixed powders of neutro-glass and A-W bioactive glass ceramics on TC4 matrix and presintered to form a transition layer, the samples then were coated with A-W powders and sintered again.

22、結果表明：儲能焊能夠實現TC4鈦合金薄板的快速凝固焊接，焊接接頭由熔核和熔核向母材過渡的熔合區（線）組成。

24、除了AIM與TC4工程，美國國家航天宇宙管理局同時也發*了一系列叫做“A-列車”的氣候感應衞星，用以提供針對雲層的縱剖圖的全球範圍的研究分析。

26、方法：採用動電位極化技術，分別測定激光焊接及脈衝氬弧焊接TA2和TC4後，材料陽極極化曲線的變化。

1、Machinability of Hydrogenating Titanium Alloy TC4

3、High-temperature Deformation Process and Microstructural Characteristics of TC4 Alloy

5、Study on Superplastic Forming and Precision Control of TC4 Alloy Deep Cups;

7、Study on Microstructure and Mechanical Properties of C/C Composite and TC4 Brazed Joint;

11、Microstructure refinement surface layer was obtained in TC4 Titanium Alloy surface treated by a high-energy shot peering (HESP) technique.

15、Based on the experiments of high-speed milling titanium alloy TC4 the effects of cutting parameters, the materials of the milling cutters on cutter we ar are discussed.

19、結果表明：在相同温度下，混合陶瓷粉對TC4合金基體的浸潤*優越於A-W生物活*陶瓷粉；

23、利用鈦合金阻燃*能測試裝置，結合金相分析，研究了TC4和TC11兩種合金的抗燃燒*能，分析了鈦合金燃燒產物的顯微組織特點。

27、TC4工程將研究出關於含*捲雲的各種資料，這種雲層是在大氣上層中通過受熱量驅使或對流的暴風雨變化過程中形成的，而此暴風雨也是與熱帶暖水海洋上空的狀況密切相關。

4、Localized Adiabatic Shear Deformation of TC4 and DT4 Alloys

9、Based on the direct-reverse superplastic forming TC4 deep cylinder with uniform thickness thickness accuracy: 1.

17、The combustion resistance properties of TC4 and TC11 titanium alloys had been studied by means of titanium combustion testing equipment and metallographic examination.

25、採用電磁渦流激振的振動疲勞試驗，對TC4材料製成的平板葉片受外物損傷後的剩餘振動疲勞壽命進行了研究。

6、The stress relaxation behavior characters of TC4 alloy and influence of processing factors were studied.

21、The results show that the wettability of the mixed ceramic powders on TC4 alloy matrix is better than that of the A-W powders on it at the same temperature.

13、However, results from AIM and TC4 may modify this view—which is the main point of deploying them.

2、Electron Beam Welding of Dissimilar Materials between QCr0.8 and TC4;