deformations造句怎麼寫

It would make no difference if the bar deformations were totally inelastic.

Because of the lower yield point of rotor material, the local plastic deformations are found during operation at rate speed.

The tensile stress induced by restrained thermal and autogenous shrinkage deformations was the main driving force of cracking in concrete at early age.

An open thin-walled membed subjected to skew-bending not only produces the bending deformations in two principle directions, but causes torsion as well.

Fundamental form and some kinds of deformations about TEM horn antenna which often be used in the time domain have been summarized, some kinds of its difference feed means have been introduced.

Taking Su-Tong Yangtze River Bridge for example, by using FEM, some local relative deformations of steel box girder are analyzed; and the influence on the construction control Is studied.

The Rigging section of this tutorial shows you how to get your model ready for animation and covers blend shapes, skeleton creation, painting weights for smooth deformations of your geometry, IK handles to move the legs, as well as adding hand and foot controls using locators and set driven keys.

Without loss of generality, shear deformations will be neglected.

Such readings can reveal longer-period deformations in the earth.

Appreciable differences may occur, however, when small deformations considerably alter the loading conditions.

If this were not true it would imply that the given bar deformations were not compatible.

If the loads on a continuous beam are vertical and if there are no axial deformations, then all the reactions will be vertical.

The variation of nuclear deformations with Z, N is studied with a two-level model with charge independent nucleon-nucleon interactions. Results obtained agree fairly well with observed ones.

Nuclear deformations confirm shell structure.

Numerical simulation of crust rheological property reflected by post-seiemic deformations of Kunlun large earthquake

The deformations of the element in the middle surface of the shell and its rotation about all axes are considered in the derivation of these equations.

According to the theory of bearing forces and deformations, this paper gives distribution laws of the shearing stresses in the side fille welds of overlap connection with comparative accuracy.

Simplified calculation of tall building structures with transfer stories considering floor deformations

Prediction of surrounding deformations of underground powerhouse using ANFIS

The deformations at the surface of the crust after rainfalls have close relations to the occurrence of shallow shocks in the upper crust.