welds造句怎么写

Cylinder leaks usually occur at welds (low pressure cylinders), or at cylinder valves.

But the wild child boldly gets rid of him with a fluid shield and has yielded a building without welds.

The quality of spot welds in galvanized sheet metal was evaluated by using ultrasonic water immersion focusing method.

In this investigation recrystallization in metals was first used to study the plastically - deformed zone induced by cold cracking in welds.

The type of simple joints is widely used in tubular structures, but determination of strength of welds in such kind of joints has not been well solved yet.

The results show that after post-weld heat treatment(PWHT), the welds of X80 steel seriously embrittle, and the fracture morphology of impact specimens is cleavage.

After the water quenching of the drill pipe steel grade, the cooling method of drill pipe welds is changed to the quick water cooling instead of the previous high-pressure air cooling.

Through dye check, X-ray test, and metallographic examination, quite a lot of cracks were found in the welds of a deaerator storage tank at the cogeneration plant of Shanghai Petrochemical Works.

All welds shall be undetectable in finished work.

P There shall be no welds in wires and bars. Individual wires of strands may contain staggered welds made only before cold drawing.

Seal welds shall be welded with half the thickness of the carrying fillet weld.

No spalled paint exists at the plug weld and for a short distance each side of the plug welds.

Effects of the synergic-pulsed MIG welding on the microstructure and properties of 2195 Al-Li alloy welds

The typical salt tectonic styles include salt cored anticlines, allochthonous salt, salt pillows, salt (fault) welds, salt necking, salt-associated depressions and "fish-tail" structures.

The frame of heavy stay column sets for Dongjiang Power Station possesses a great rigidity with large dimension, so its requirements for welds quality and welding deformation are strict.

Radiographic inspection of welds for PWR fuel rods

The welds on the board are scanned with lasers for defects.

Adjustable "Crater" control - Gives the operator control over welding conditions at the start and end of welds for improved weld quality.

"Dry Washing" of welds and torch heating of welds for straightening purposes are not permitted.

An "interbody fusion" is a bony bridge that "welds" the two vertebral bodies together to stop unstable motion.

The welds passed the examination of radiographic test( ultrasonic inspection, magnetic testing).

An Indian worker welds a gate, as the sun sets, near the Jawaharlal Nehru Stadium, the main venue for the Commonwealth Games in New Delhi, India, Friday, Sept. 24, 2010.