inlet and outlet造句怎么写

8、Temperature difference between inlet and outlet reduces as liquid flux increasing.

10、It should be included the inlet and outlet dimension for the Max overall dim.

12、The variation of heating performance coefficient, inlet and outlet temperature of heat pump hot water, actual mass flow of heating medium, peak-shaving boiler outlet temperatu…

14、The inlet and outlet of water cyclone can be connected very quickly, which is convenient for replacement and maintenance.

16、Both water inlet and outlet pipelines should be supported by a separate stand and not by the pump body.

18、Rinse surfaces once through with DI water until conductivity of inlet and outlet fluids are within tolerances.

20、Manifold shall have safety pressure relieve valve, pressure regulators, and pressure gauges indicating inlet and outlet pressure, bleed valve (vent valve) and pigtail for cylinder connections.

22、When installing this product, the orientation of inlet and outlet must not be reversed. And it must be fixed by support or hoop.

24、The inlet and outlet pressures of the adsorber and the pressure of oxygen tank of a pressure swing adsorption oxygen generator were studied experimentally.

26、Prior to servicing any Watts valve, it is mandatory to shut down the water system by closing both the inlet and outlet shutoff valves.

28、Protect the regulator. If the regulator is to remain out of service, protect the inlet and outlet fittings from dirt, contamination, or mechanical damage.

30、"Series 140, N240 and 340 have the same basic body construction and advanced design features as the 40 Series and are identical to the 40 Series except for discharge capacity and size of inlet and outlet connections."

32、In the above map ,we clearly know that the establishment of inlet and outlet of 4th Nuclear Power Plant will result in an unrecoverable damage to the ecological environment of Santiago Bay and land and sea resources.

34、The invention discloses an inlet and outlet control valve of a solar water heater, which is simple in structure, low in cost, convenient to install and suitable for improving old solar water heaters.

36、The result shows: the dimension disposal of the triangular groove used in inlet and outlet way should be unsymmetrical, and plate noises can be controlled well after using triangular groove.

38、The fairing rings are built in the inlet and outlet of the vertical parts of inverse U bend respectively in order to restrain the effect of bend on the flow in it.

2、heat transfer medium inlet and outlet

4、Each fluid enters through its own pump inlet and outlet.

6、Influence of angles and hole pitches on discharge coefficients of expanded holes at inlet and outlet

9、The crisscross inlet and outlet holes make various types of lamp routing possible.

13、Our positive displacement pumps with exhaust silencer and inlet and outlet filters assure you top notch reliable performance.

17、On design for foundation treatment of inlet and outlet flood storage in Qiujiahu of Yingshang county in Anhui

21、Pump inlet and outlet are on the same horizontal axis and of the same diameters, thus allowing easy disassembly and small occupation space.

25、The process design is completed for the key equipment of heat exchanger for the process streams of inlet and outlet, DME rectifying tower and methanol distillation tower.

29、In industry production, it is suggested that the operation method that inlet and outlet of the module are exchanged each other can acquire higher average flux.

33、The influences of the arrangement and diameters of inlet and outlet, the Oring layout, and the chamber height on the optimal for flow rate working frequency were studied experimentally.

37、The effect of main parameters such as ferment time, temperature of material, temperature of inlet and outlet and rotational speed of atomizer ect. on albumen powder quality was also discussed.

3、It's better to put letters at the inlet and outlet.

7、Shape, size, site, color, and inlet and outlet slope of page nexto page.

15、The composition and temperature of inlet and outlet gas at different reforming conditions were investigated by the model.

23、The design experience of how to choose three key parameters: the width of thermal channel, the layout of inlet and outlet and the type of glass is discussed.

31、Prior to servicing the relief valve, it is mandatory to shut down water system by closing both the inlet and outlet shutoff valves and relieving pressure within the assembly by opening the#2,#3 and#4 test cocks.

1、radiator inlet and outlet hose

11、Fan coil air outlet and the air return are not at the same level (such as when the outlet for side inlet and outlet for the last time), air inlet and the air return distance can be relatively close.

27、a By-Pass can be used to equalize pressure at inlet and outlet before opening main valve; facilitates easy valve operation. Can also be used for preheating outlet lines and eliminate damage from too fast expansion.

5、Heat preservation is for inlet and outlet flange and body and the effect is very well.

35、Identify the regulator. Check the label and the inlet and outlet gauges. Ascertain that the high-pressure gauge is suitable for the pressure of the cylinder or source system.

19、Product plan: adopt laser sintering hot-extrusion to manufacture the inlet and outlet valve seat of auto engine.