inductor造句怎么写

And he found something missing: a fourth basic circuit element besides the standard trio of resistor, capacitor and inductor.

This paper will study the principle of depressing the ripple of full-bridge phase-shift converter by coupled inductor filter.

The water-cooled guide in the inductor is actually the motion track for heating workpiece, it is working under high temperature all the time.

When powder core is used to preparation of APFC inductor, lower core loss will be obtained as long as core sizes and coil turns are properly selected.

"A water-cooled coil (inductor), acting as the primary winding of a transformer, surrounds the material to be heated (the workpiece), which acts as the secondary winding. Alternating current flowing in the primary coil induces eddy currents in the workpiece, causing it to become heated."

Represents an inductor. Inductor core and adjustability can be specified.

I was 10 and wound wire around a toilet paper tube to form the inductor.

Professional production fluorescent lamps, starter holders electronic inductor line and contact other light box.

The paper presents the circuit structure type of the D. C. inductor in high power thyristor exciting system and the role of the D. C. inductor in the exciting current self-regulation control system.

Light inductor helps Intellectual machine to check the paper, no paper no working and vice versa while it also can lessen knife abrasion and correct cutting.

balanced inductor logical element

The reactant in an induced reaction that has an increased rate of reaction in the presence of the inductor .

In addition, the multi-tap inductor is very much effective for the surface treatment of the special quenched product, such as the traveling wheel of the gantry crane.

Diathermanous furnace inductor, is also know as through-type inductor, it is long or short according to the length of heating workpiece and the diameter of the workpiece.

In case that the water inflow is not enough or the water pressure is not enough, it may lead to gasifying, burning red and out of shape, and the heating workpiece may not go through the inductor.

Based on the method of source transfer, this paper discusses the decoupling inductor. The method can easily present a decoupling circuit and give the usable conditions of the decoupling inductor.